admin@carriff.com
London, ON N5V 4K7
Canada
(866) 457-7166
Midland, NC 28107
United States
(800) 845-5184
Drain-Sleeve® is our Drainage Filter Sock™ designed specifically for do-it-yourself drainage projects, including foundation drainage, landscape drainage, low-spot drainage, and more!
Like all of our Drainage Filter Sock™, Drain-Sleeve® filters protect subsurface drainage systems by preventing silt and sand from clogging perforated drainage pipes, and are an inexpensive way to extend the life of drainage systems.
Drain-Sleeve® filters are built on the same technology and design as our bulk Drainage Filter Sock™, but come in DIY-friendly sizes and are available in home improvement stores throughout the United States and Canada.
Drain-Sleeve® can be used with or without granular backfill materials, depending on local soil conditions. Alternatively, it can be used as an added layer of protection in a typical French Drain design to prevent pipes from clogging. Reliability and flexibility in a single product!
A variety of Drain-Sleeve® products are available to meet the demands of any job, big or small. Review the table below to find the product that is right for you.
Product | Length | Pipe Diameter | EZ Loader Applicator |
Drain-Sleeve® Package | 10 ft. (3 m) | 3, 4 in. (75, 100 mm) | No |
Drain-Sleeve® Preload | 100 ft. (30 m) | 3, 4, 6 in. (75, 100, 150 mm) | Yes |
Drain-Sleeve® Roll | 100 ft. (30 m) | 3, 4, 6 in. (75, 100, 150 mm) | No |
There’s a Drain-Sleeve® product for your every need! They can be found in major home improvement stores throughout the US and Canada, including Home Depot and Lowe’s. Click on a product below to find where it is available.
Installing this product on a drainage pipe is easy. Simply pull the filter over the pipe as if pulling on a sock. There are no seams to sew or tape, making installation quick and easy. If necessary, you can cut off excess Drain-Sleeve® with scissors and save it for your next project.
Drain-Sleeve® works with any perforated drainage pipes, including corrugated polyethylene pipes, PVC pipes, steel pipes, and aluminum pipes.
For ease of installation, we recommend using the Preloaded Drain-Sleeve® for 30 ft. (9 m) pipes or longer. Please note that the patented EZ Loader applicator only comes with our Preloaded Drain-Sleeve® products.
All Drain-Sleeve® filters are designed to meet or exceed the performance criteria for Type A fabrics defined by ASTM Standard D6707-06 (2019): Standard Specification for Circular-Knit Geotextile Fabric for Use in Subsurface Drainage Applications. The table shows how Drain-Sleeve® filters compare to the ASTM criteria for Type A fabrics.
Criterion | ASTM Value | Drain-Sleeve® Value |
Permittivity | Min: 2.4sec-1 | 4.5sec-1 |
Apparent Opening Size | Max: 0.600 mm | 0.600 mm |
Puncture Resistance | Min: 800 N | 1000 N |
*In addition to the criteria above, we manufacture and test our Sock™ and Super Sock™ filters to meet several other standards. Please review our Product Performance Data Sheets for Sock™ and Super Sock™ filters for more information.
Drain-Sleeve® is our Drainage Filter Sock™ designed specifically for do-it-yourself drainage projects, including foundation drainage, landscape drainage and more.
Newsletter